woodworking beginner box
Hello Again,
Afte I finished working on the calico box, I turned my attention to the pine box and I finished the lid. Here are some photos:
I began the lid with a round pine blank. As this piece of wood was only 3/4" thick, it needed to have a small block glued to the top for a knob and that is what you see here:
Here is a photo of the blank in my vise with an additional C-clamp holding it fast while the glue dries. Ive lined up both pieces with a wooden pin and if you look carefully you can see the pin in the center of the photo. This prevents the pieces from shifting while its being clamped together:
I let it dry over night and this morning I put it on the lathe and shaped it. You can see the knob in the center and Ive also rounded off the corners and sanded it some. I think it will require a little more turning to remove that shoulder on the edge of the lid. This will help the two parts blend in together a little better:
