woodworking jewelry box
I love a good spray paint project. It is the cheapest way to give something a new look, so, when Krylon contacted me and asked if Id be interested in trying some of their new spray paint, I was thrilled at the opportunity. I chose their new Rust Protector quick drying spray paint in Copper Metallic and Aged Brass Metallic and I loved it.
The timing couldnt have been more perfect as I had picked up one of these copper post caps at Lowes on clearance not too long ago and thought it would be perfect for something,
I just wasnt sure what yet.
Then inspiration hit. Our cheap basic mailbox has been looking pretty sad for the last few years so why not give it a facelift. The spray paint I chose was perfect as it is a rust protector and of course, a mailbox is exposed to all kinds of weather so thats what it needed. I was also pretty happy that I selected copper and aged brass for my choice of colors. The mailbox would also tie in nicely with my copper porch curtain rods.
Heres a before shot of the sad looking mailbox.
Pretty dull, huh? You might be wondering why anyone would care about sprucing up something as simple and basic as a mailbox and the answer is, I would. Im just that kinda gal. I like to think that simple mundane objects, like mailboxes, as part of a home,
deserve to look good, too.
So heres what I did......
As usual, I wanted this project to be as cheap as possible, so we went hunting for some rustic wood, as in, beside the road, free. No problem.
We found a 4 x 4 and a 2 x 4, both dirty and old, just like I wanted.
![torer]()
First I prepared the wood by hosing it off, letting it dry and then sanding it with 180 grit sandpaper. I wasnt going for perfection here, after all, it was going to be outside. Next, I brushed on some special walnut stain and set them aside to dry.
Next up, the mailbox. After cleaning and removing the old number stickers, I spray painted the flag first with the aged brass metallic. 
Do you find information about woodworking jewelry box are you looking for? If not, below may help you find more information about the woodworking jewelry box. Thank you for visiting, have a nice day.
While that dried, I grabbed a package of these.
They are foam letter and number stickers available in any craft store. I wanted to personalize our mailbox and also create an embossed metal look. I added our name to one side and our address to the other side. Then I taped off the already painted flag and spray painted the mailbox with the copper metallic paint. I gave it a good 4 or 5 coats.
It is a fast drying spray paint and it certainly lives up to that.
It was almost dry before I got around to the other side of the box.
Mailbox done.
The next part, building the post, was a bit difficult and I didnt take photos. It took two pairs of hands, which required hubbys help and stopping for photos isnt his thing. :)
After the entire thing was complete, I added the copper end cap to the top of the 4 x 4 post with a little glue and heres how it looks now.
We are pretty happy with how it turned out. And we finished just in time as about 10 minutes after this photo, a huge storm hit. But the spray paint held up great!
I cant wait to add some mums and pumpkins to the base
of it for a little Autumn decoration. :)
Heres a closeup of the foam stickers. 
The adhesive on the back is pretty strong so Im confident they arent going anywhere.
This was a pretty fun way to spruce up a cheapo mailbox and I loved how fast the paint dried!
Thanks Krylon!
I am certainly no expert, but here are a few spray painting tips that have helped make spray painting easier for me.
* Always keep your spray paint back about a foot from whatever your painting.
If youre too close, your paint will go on too thick.
* If youre spraying, your arm should be moving. If it isnt,
this will also cause too much paint in a single area which causes the paint to run.
* Its always better to do several light coats instead of one heavy coat in an
attempt to hurry and get it done. I learned my lesson on that one over and over.
* If you have to stop to make dinner or do a load of laundry like me, wipe the excess paint off the spray valve. That way it wont get a weird clog and spray out the side,
painting your face when you resume working on your project. :)
If any of you have any other helpful tips, please feel free to leave them in the comment section and I can add them to this post. :)
Have a great day!
Diana
Do you find information about woodworking jewelry box are you looking for? If not, below may help you find more information about the woodworking jewelry box. Thank you for visiting, have a nice day.
About torer
Author Description here.. Nulla sagittis convallis. Curabitur consequat. Quisque metus enim, venenatis fermentum, mollis in, porta et, nibh. Duis vulputate elit in elit. Mauris dictum libero id justo.
